HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

315
Tunneling commands
bandwidth
Use bandwidth to configure the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth is 64 kbps.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth of Tunnel 1 to 100 kbps.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] bandwidth 100
default
Use default to restore the default settings for the tunnel interface.
Syntax
default
Views
Tunnel interface view
Predefined user roles
network-admin