HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

319
Field Description
Tunnel interface
ID of the tunnel interface on the DS-Lite tunnel to which the mapping
belongs.
When the tunnel to which the mapping belongs is removed or a
tunnel with a same ID but different mode is created, this field displays
hyphens (--).
Idle time
Remaining time in minutes for the mapping between IPv6 address of
the B4 router and tunnel ID.
When the mapping ages out but is still applied by a session, this field
displays hyphens (--).
display interface tunnel
Use display interface tunnel to display information about tunnel interfaces, including the source address,
destination address, and tunnel mode.
Syntax
display interface [ tunnel ] [ brief [ down ] ]
display interface [ tunnel [ number ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number: Specifies the number of a tunnel interface.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
down: Displays information about interfaces in the physical state of DOWN and the causes. If you do not
specify this keyword, this command displays information about interfaces in all physical states.
description: Displays the entire user configured interface description. Without this keyword, the
command can display the first 27 characters if the description string contains more than 27 characters.
Usage guidelines
If you do not specify the tunnel keyword, this command displays information about all interfaces on the
device.
If you specify the tunnel keyword without the number argument, this command displays information
about all existing tunnel interfaces.
Examples
# Display detailed information about interface Tunnel 1.
<Sysname> display interface tunnel 1
Tunnel1
Current state: UP