HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

326
Predefined user roles
network-admin
Parameters
number: Specifies the tunnel interface number.
Usage guidelines
Use this command to clear old statistics so you can observe new traffic statistics on a tunnel interface.
If you do not specify any parameter, this command clears the statistics for all interfaces.
If you specify only the tunnel keyword, this command clears the statistics for all tunnel interfaces.
If you specify both the tunnel keyword and the number argument, this command clears the statistics for
the specified tunnel interface.
Examples
# Clear the statistics for the interface Tunnel 1.
<Sysname> reset counters interface tunnel 3
Related commands
display interface tunnel
shutdown
Use shutdown to shut down a tunnel interface.
Use undo shutdown to bring up a tunnel interface.
Syntax
shutdown
undo shutdown
Default
The tunnel interface is enabled.
Views
Tunnel interface view
Predefined user roles
network-admin
Usage guidelines
This command disconnects all links set up on the interface. Make sure you fully understand the impact of
the command on your network.
Examples
# Shut down the interface Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] shutdown
Related commands
display interface tunnel