HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

25
DHCP commands
Common DHCP commands
dhcp dscp
Use dhcp dscp to set the DSCP value for DHCP packets sent by the DHCP server or the DHCP relay agent.
Use undo dhcp dscp to restore the default.
Syntax
dhcp dscp dscp-value
undo dhcp dscp
Default
The DSCP value in DHCP packets is 56.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Sets the DSCP value for DHCP packets, in the range of 0 to 63.
Usage guidelines
The DSCP value of a packet specifies the priority level of the packet and affects the transmission priority
of the packet. A bigger DSCP value represents a higher priority.
Examples
# Set the DSCP value for DHCP packets to 30.
<Sysname> system-view
[Sysname] dhcp dscp 30
dhcp enable
Use dhcp enable to enable DHCP.
Use undo dhcp enable to disable DHCP.
Syntax
dhcp enable
undo dhcp enable
Default
DHCP is disabled.