HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

62
undo dhcp relay client-information record
Default
The DHCP relay agent does not record client information in relay entries.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Disabling recording of client information deletes all recorded relay entries.
Client information is recorded only when the DHCP relay agent is configured on the gateway of DHCP
clients.
Examples
# Enable recording of relay entries on the relay agent.
<Sysname> system-view
[Sysname] dhcp relay client-information record
Related commands
• dhcp relay client-information refresh
• dhcp relay client-information refresh enable
dhcp relay client-information refresh
Use dhcp relay client-information refresh to configure the interval at which the DHCP relay agent
periodically refreshes relay entries.
Use undo dhcp relay client-information refresh to restore the default.
Syntax
dhcp relay client-information refresh [ auto | interval interval ]
undo dhcp relay client-information refresh
Default
The refresh interval is automatically calculated based on the number of relay entries.
Views
System view
Predefined user roles
network-admin
Parameters
auto: Automatically calculates the refresh interval. The more the entries, the shorter the refresh interval.
The shortest interval must not be less than 500 ms.
interval interval: Specifies the refresh interval in the range of 1 to 120 seconds.
Usage guidelines
If you use this command multiple times, the most recent configuration takes effect.