HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

76
Examples
# Disable the duplicate address.
<Sysname> system-view
[Sysname] undo dhcp client dad enable
dhcp client dscp
Use dhcp client dscp to set the DSCP value for DHCP packets sent by the DHCP client.
Use undo dhcp client dscp to restore the default.
Syntax
dhcp client dscp dscp-value
undo dhcp client dscp
Default
The DSCP value in DHCP packets is 56.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Sets the DSCP value for DHCP packets, in the range of 0 to 63.
Usage guidelines
The DSCP value of a packet specifies the priority level of the packet and affects the transmission priority
of the packet. A bigger DSCP value represents a higher priority.
Examples
# Set the DSCP value for DHCP packets sent by the DHCP client to 30.
<Sysname> system-view
[Sysname] dhcp client dscp 30
dhcp client identifier
Use dhcp client identifier to configure a DHCP client ID for an interface.
Use undo dhcp client identifier to restore the default.
Syntax
dhcp client identifier { ascii string | hex string | mac interface-type interface-number }
undo dhcp client identifier
Default
An interface generates the DHCP client ID based on its MAC address. If the interface has no MAC
address, it uses the MAC address of the first Ethernet interface to generate its client ID.
Views
Interface view