4000 Router Series Layer 3 - IP Services Configuration Guide

Configuration procedure

Before performing the following configuration, make sure the device and the host can reach each other,

and that the IP addresses of the interfaces are configured as shown in Figure 33.

1. Conf

igure the DNS server:

The configuration might vary with DNS servers. The following configuration is performed on a PC

running Windows Server 2000.

a. Select Start > Programs > Administrative Tools > DNS.

The DNS server configuration page appears, as shown in Figure 34.

b. Right

-click Forward Lookup Zones, select New Zone, and then follow the wizard to create a

new zone named com.

Figure 34 Creating a zone

c. On the DNS server configuration page, right-click zone com, and select New Host.