4000 Router Series Layer 3 - IP Services Configuration Guide

Figure 39 Network diagram

Configuration procedure

Before performing the following configuration, make sure the device and the host can reach each other,

and the IPv6 addresses of the interfaces are configured, as shown Figure 39.

1. Conf

igure the DNS server:

The configuration might vary with DNS servers. The following configuration is performed on a PC

running Windows Server 2003. Make sure that the DNS server supports the IPv6 DNS function so

that the server can process IPv6 DNS packets, and the interfaces of the DNS server can forward

IPv6 packets.

a. Select Start > Programs > Administrative Tools > DNS.

The DNS server configuration page appears, as shown in Figure 40.

b. Right

-click Forward Lookup Zones, select New Zone, and then follow the wizard to create a

new zone named com.

Figure 40 Creating a zone

c. On the DNS server configuration page, right-click zone com, and select Other New Records.