HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Configuration Guide

126
Task Command
Display information about inbound dynamic
NAT.
display nat inbound
Display NAT logging configuration. display nat log
Display information about NAT NO-PAT entries
(MSR2000/MSR3000).
display nat no-pat
Display information about NAT NO-PAT entries
(MSR4000).
display nat no-pat [ slot slot-number ]
Display information about outbound dynamic
NAT.
display nat outbound
Display NAT Server configuration. display nat server
Display internal server group configuration. display nat server-group [ group-number ]
Display sessions that have been NATed
(MSR2000/MSR3000).
display nat session [ { source-ip source-ip | destination-ip
destination-ip } * [ vpn-instance vpn-name ] ] [ verbose ]
Display sessions that have been NATed
(MSR4000).
display nat session [ { source-ip source-ip | destination-ip
destination-ip } * [ vpn-instance vpn -name ] ] [ slot
slot-number ] [ verbose ]
Display static NAT mappings. display nat static
Display NAT statistics (MSR2000/MSR3000). display nat statistics
Display NAT statistics (MSR4000). display nat statistics [ slot slot-number ]
Clear NAT sessions. reset nat session
NAT configuration examples
One-to-one static NAT for internal-to-external access
Network requirements
Configure static NAT to allow the user at 10.110.10.8/24 to access the Internet.
Figure 52 Network diagram
Host
10.110.10.8/24
Server
Internet
GE1/1
10.110.10.1/24
GE1/2
202.38.1.1/16
Router