HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Configuration Guide

151
Verifying the configuration
After completing the configurations, both internal and external hosts can access the internal servers by
using domain names.
# Display all NAT configuration and statistics.
[Router] display nat all
NAT outbound information:
There are 1 NAT outbound rules.
Interface: GigabitEthernet1/2
ACL: --- Address group: --- Port-preserved: N
NO-PAT: N Reversible: N
NAT internal server information:
There are 2 internal servers.
Interface: GigabitEthernet1/2
Protocol: 6(TCP)
Global IP/port: 202.38.1.2/21
Local IP/port: 10.110.10.2/21
Interface: GigabitEthernet1/2
Protocol: 6(TCP)
Global IP/port: 202.38.1.2/80
Local IP/port: 10.110.10.1/80
NAT DNS mapping information:
There are 2 NAT DNS mappings.
Domain name: ftp.server.com
Global IP : 202.38.1.2
Global port: 21
Protocol : TCP(6)
Domain name: www.server.com
Global IP : 202.38.1.2
Global port: 80
Protocol : TCP(6)
NAT logging:
Log enable : Disabled
Flow-begin : Disabled
Flow-end : Disabled
Flow-active: Disabled
NAT mapping behavior:
Mapping mode: Address and Port-Dependent
ACL : ---
NAT ALG:
DNS: Enabled
FTP: Enabled