HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Configuration Guide

168
Figure 65 Network diagram
Configuration procedure
1. Configure routes so that the Host, Router A, and Router B can communicate with each other.
(Details not shown.)
2. On Router A, configure NAT and IP virtual fragment reassembly.
<RouterA> system-view
[RouterA] nat static inbound 11.2.2.3 10.1.1.1
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] nat outbound
[RouterA-Ethernet1/2] ip virtual-reassembly
Verifying the configuration
Router A checks, sequences, and caches fragments that do not arrive in order at Ethernet 1/2. You can
use the display ip virtual-reassembly command to display related information.
Displaying and maintaining IP performance
optimization
Execute display commands in any view and reset commands in user view.
Task Command
Display brief information about RawIP connections
(MSR2000/MSR3000).
display rawip
Display brief information about RawIP connections
(MSR4000).
display rawip [ slot slot-number ]
Display detailed information about RawIP connections
(MSR2000/MSR3000).
display rawip verbose [ pcb pcb-index ]
Display detailed information about RawIP connections
(MSR4000).
display rawip verbose [ slot slot-number [ pcb
pcb-index ] ]
Display brief information about TCP connections
(MSR2000/MSR3000).
display tcp
Display brief information about TCP connections
(MSR4000).
display tcp [ slot slot-number ]
Display detailed information about TCP connections
(MSR2000/MSR3000).
display tcp verbose [ pcb pcb-index ]
Display detailed information about TCP connections
(MSR4000).
display tcp verbose [ slot slot-number [ pcb
pcb-index ] ]
Display brief information about UDP connections
(MSR2000/MSR3000).
display udp