HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Configuration Guide

223
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] ipv6 address 2::1 64
[RouterA-Ethernet1/2] quit
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ipv6 address 1::1 64
# Enable the DHCPv6 relay agent on Ethernet 1/1 and specify the DHCPv6 server on the relay
agent.
[RouterA-Ethernet1/1] ipv6 dhcp select relay
[RouterA-Ethernet1/1] ipv6 dhcp relay server-address 2::2
2. Configure Router A as the gateway, enable Router A to send RA messages, and turn on the M and
O flags.
[RouterA-Ethernet1/1] undo ipv6 nd ra halt
[RouterA-Ethernet1/1] ipv6 nd autoconfig managed-address-flag
[RouterA-Ethernet1/1] ipv6 nd autoconfig other-flag
Verifying the configuration
# Display DHCPv6 server address information on Router A.
[RouterA-Ethernet1/1] display ipv6 dhcp relay server-address
Interface: Ethernet1/1
Server address Outgoing Interface
2::2
# Display packet statistics on the DHCPv6 relay agent.
[RouterA-Ethernet1/1] display ipv6 dhcp relay statistics
Packets dropped : 0
Packets received : 14
Solicit : 0
Request : 0
Confirm : 0
Renew : 0
Rebind : 0
Release : 0
Decline : 0
Information-request : 7
Relay-forward : 0
Relay-reply : 7
Packets sent : 14
Advertise : 0
Reconfigure : 0
Reply : 7
Relay-forward : 7
Relay-reply : 0