HP MSR2000/3000/4000 Router Series MPLS Command Reference

93
Static CRLSP commands
display mpls static-cr-lsp
Use display mpls static-cr-lsp to display information about static CRLSPs.
Syntax
display mpls static-cr-lsp [ lsp-name lsp-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
lsp-name lsp-name: Displays information about the static CRLSP specified by its name, a case-sensitive
string of 1 to 15 characters. If you do not specify this option, this command displays information about
all static CRLSPs.
verbose: Displays detailed information about static CRLSPs.
Examples
# Display brief information about static CRLSPs.
<Sysname> display mpls static-cr-lsp
Name LSR Type In/Out Label Out Interface State
static-cr-lsp-1 Ingress Null/20 Eth1/1 Up
Table 25 Command output
Field Descri
p
tion
Name Name of the static CRLSP.
LSR Type LSR type of the local node on the static CRLSP: ingress, transit, or egress.
In/Out Label Incoming label/outgoing label.
Out Interface Outgoing interface.
State
Current state of the static CRLSP:
• Down—The static CRLSP is not available.
• Up—The static CRLSP is available.
# Display detailed information about static CRLSPs.
<Sysname> display mpls static-cr-lsp verbose
LSP Name : Tunnel0
LSR Type : Ingress
In-Label : Null
Out-Label : 60