HP MSR2000/3000/4000 Router Series MPLS Command Reference

94
Out-Interface : Eth1/1
Nexthop : 20.1.1.2
Class Type : CT0
Bandwidth : 0 kbps
LSP State : Up
Table 26 Command output
Field Descri
p
tion
LSP Name Name of the static CRLSP.
LSR Type
LSR type of the local node on the static CRLSP: Ingress, Transit, or
Egress.
In-Label Incoming label.
Out-Label Outgoing label.
Out-Interface Outgoing interface.
Nexthop Next hop address.
Class Type Class type of the static CRLSP: CT 0, CT 1, CT 2, or CT 3.
Bandwidth Bandwidth required by the static CRLSP, in kbps.
LSP State
Current state of the static CRLSP:
• Down—The CRLSP is not available.
• Up—The CRLSP is available.
Related commands
• static-cr-lsp egress
• static-cr-lsp ingress
• static-cr-lsp transit
static-cr-lsp egress
Use static-cr-lsp egress to configure the egress node of a static CRLSP.
Use undo static-cr-lsp egress to delete the egress node configuration of the static CRLSP.
Syntax
static-cr-lsp egress lsp-name in-label in-label-value
undo static-cr-lsp egress lsp-name
Default
No static CRLSP exists on the device.
Views
System view
Predefined user roles
network-admin
Parameters
lsp-name: Specifies a name for the static CRLSP, a case-sensitive string of 1 to 15 characters.