HP MSR2000/3000/4000 Router Series MPLS Command Reference

115
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
destination ip-address: Displays information about the RSVP resource reservation requests with the
specified tunnel destination address.
source ip-address: Displays information about the RSVP resource reservation requests with the specified
tunnel source address. The tunnel source address is the extended tunnel ID in the Session object of an
RSVP message.
tunnel-id tunnel-id: Displays information about the RSVP resource reservation requests with the specified
tunnel ID. The value range for a tunnel ID is 0 to 65535.
prev-hop ip-address: Displays information about the RSVP resource reservation requests sent to the
specified upstream device. The ip-address argument is the address of the destination device of the RSVP
resource reservation requests, which is the address of the previous hop on the tunnel.
verbose: Displays detailed information. If you do not specify this keyword, this command displays brief
information.
Examples
# Display brief information about the RSVP resource reservation requests sent to all upstream devices.
<Sysname> display rsvp request
Destination Source Tunnel-ID Previous-hop Style
3.3.3.9 1.1.1.9 1 57.10.10.1 SE
Table 36 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Source Tunnel source address.
Style
Resource reservation style:
• SE—Shared-explicit style.
• FF—Fixed-filter style.
# Display detailed information about the RSVP resource reservation requests sent to all upstream devices.
<Sysname> display rsvp request verbose
Destination: 3.3.3.9 Source: 1.1.1.9
Tunnel ID: 1 Style: SE
Previous hop: 57.10.10.1 Previous hop LIH: 0xf0008
Send message epoch: 0 Send message ID: 0
Out-Interface: Eth0/0/2 Refresh interval: 30000 ms
Unknown object number: 0
Flow descriptor 1:
Flow specification:
Average bitrate: 50.00 kbps Maximum burst: 1000.00 bytes
Path MTU: 1500 QoS service: Controlled-Load