HP MSR2000/3000/4000 Router Series MPLS Command Reference

119
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
destination ip-address: Displays information about the RSVP path states with the specified tunnel
destination address.
source ip-address: Displays information about the RSVP path states with the specified tunnel source
address. The tunnel source address is the extended tunnel ID in the Session object of an RSVP message.
tunnel-id tunnel-id: Displays information about the RSVP path states with the specified tunnel ID. The
value range for a tunnel ID is 0 to 65535.
lsp-id lsp-id: Displays information about the RSVP path states with the specified LSP ID. The lsp-id
argument specifies the ID of a CRLSP, in the range of 0 to 65535.
verbose: Displays detailed information. If you do not specify this keyword, this command displays brief
information.
Examples
# Display brief information about all RSVP path states.
<Sysname> display rsvp sender
Destination Source Tunnel-ID LSP-ID Style Bitrate
3.3.3.9 1.1.1.9 1 5 SE 0.00
3.3.3.9 2.2.2.9 253 17767 SE 125.00
Table 40 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Source Tunnel source address.
Style
Resource reservation style:
• SE—Shared-explicit style.
• FF—Fixed-filter style.
Bitrate Tunnel bandwidth in kbps.
# Display detailed information about all RSVP path states.
<Sysname> display rsvp sender verbose
Destination: 3.3.3.9 Source: 1.1.1.9
Tunnel ID: 1 Style: SE
Sender address: 1.1.1.9 LSP ID: 5
Setup priority: 7 Holding priority: 7
FRR desired: Enabled Upstream label: 1146
Previous hop: 57.10.10.1 Previous hop LIH: 0xf0008
Average bitrate: 0.00 kbps Maximum burst: 1000.00 bytes
MTU: 1500 Qos service: Controlled-Load
Recv message epoch: 0 Recv message ID: 0