4000 Router Series MPLS Command Reference

Usage guidelines

If no parameters are specified, the command displays brief information about all LSPs. If you specify only

the verbose keyword, the command displays detailed information about all LSPs.

Examples

# Display brief information about all IPv4 LSPs.

<Sysname> display mpls lsp

FEC Proto In/Out Label Interface/Out NHLFE

100.100.100.100/24 LDP -/1049 Vlan20

Backup -/1050 Vlan21

100.100.100.10/24 LDP -/1051 Vlan22

Backup -/1050 Vlan21

100.100.100.10/24 LDP -/1049 Vlan30

101.100.100.10/24 LDP 1026/1049 Vlan20

102.100.100.10/24 LDP 1027/- -

103.100.100.10/24 LDP 1028/1049 Tunnel10

110.100.100.20/24 BGP -/1049 Vlan20

111.100.100.10/24 BGP 2028/1049 Vlan20

112.100.100.10/24 BGP 2029/- Vlan20

113.100.100.10/24 BGP 2030/1049 NHLFE1500

114.100.100.10/24 BGP 2031/1050 Tunnel100

100.100.100.100 Local -/- Vlan20

101.101.101.101/32 Static -/100 Vlan20

- Static 100/200 Vlan20

- Static 101/- Vlan20

200.200.200.200/64000/64000 RSVP -/1030 Vlan10

201.200.200.200/64000/64000 RSVP 1024/1031 Vlan10

202.200.200.200/64000/64000 RSVP 1025/- -

150.140.150.100/64001/0 StaticCR -/1000 Vlan10

- StaticCR 50/1001 Vlan10

- StaticCR 51/- -

Table 4 Command output

Field Descri

tion

FEC

Forwarding equivalence class:

• IP address/mask—Classifies FECs by destination address.

• IP address—Classifies FECs by next hop.

• IP address/Out Label—Classifies FECs by next hop and outgoing

label.

• Ingress LSR ID/Tunnel ID/LSP ID—RSVP TE FEC.

• - (a hyphen)—The LSP is a static transit LSP, static egress LSP, static

transit CR-LSP, or static egress CR-LSP.

• Backup—If the LSP is a backup LSP of the previous LSP, this field

displays Backup.