4000 Router Series MPLS Command Reference

143

Tunnel policy commands

display mpls tunnel

Use display mpls tunnel to display tunnel information.

Syntax

display mpls tunnel { all | statistics | [ vpn-instance vpn-instance-name ] destination { tunnel-ipv4-dest |

tunnel-ipv6-dest } }

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

all: Displays all tunnels.

statistics: Displays tunnel statistics.

vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31

characters. If you do not specify a VPN instance, the command displays tunnel information for the public

network.

destination: Displays the tunnel destined for the specified address.

tunnel-ipv4-dest: Specifies the tunnel destination IPv4 address.

tunnel-ipv6-dest: Specifies the tunnel destination IPv6 address.

Examples

# Display information about all tunnels.

<Sysname> display mpls tunnel all

Destination Type Tunnel/NHLFE VPN Instance

2.2.2.2 LSP NHLFE1024

3.3.3.3 CRLSP Tunnel2

3.3.3.3 GRE Tunnel3

Destination : 2001:0:130F::9C0:876A:130B

Type : LSP

Tunnel/NHLFE: NHLFE1025

VPN Instance: VPN1

Destination : 2002:0:130F::9C0:876A:130B

Type : LSP

Tunnel/NHLFE: NHLFE1026

VPN Instance: VPN2