HP MSR2000/3000/4000 Router Series MPLS Command Reference

149
Examples
# Configure a description of "This is vpn1" for VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] description This is vpn1
display bgp group vpnv4
Use display bgp group vpnv4 to display information about a specific BGP VPNv4 peer group or all BGP
VPNv4 peer groups.
Syntax
display bgp group vpnv4 [ vpn-instance vpn-instance-name ] [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31
characters. If no VPN instance is specified, this command displays BGP VPNv4 peer group information
for the public network.
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. If no peer
group is specified, this command displays all peer groups.
Examples
# Display all BGP VPNv4 peer groups for the public network.
<Sysname> display bgp group vpnv4
BGP peer group: group1
Remote AS number: not specified
Type: external
Members:
10.1.1.1
# Display information about the BGP VPNv4 peer group named group1.
<Sysname> display bgp group vpnv4 group1
BGP peer group: group1
Remote AS: 600
Type: external
Maximum number of prefixes allowed: 4294967295
Threshold: 75%
Configured hold time: 180 seconds
Keepalive time: 60 seconds
Minimum time between advertisements: 30 seconds
Peer preferred value: 0
Routing policy configured: