HP MSR2000/3000/4000 Router Series MPLS Command Reference

11
network-operator
Parameters
nib-id: Specifies a next hop ID in the range of 1 to FFFFFFFFFFFFFFFE. If you do not specify a next hop,
this command displays information about all MPLS next hops.
Examples
# Display information about all MPLS next hops.
<Sysname> display mpls nib
NIB ID: 0x40000000
Users: 1
Status: Active
ECMP number: 1
Outgoing NHLFE ID: 1024
Backup outgoing NHLFE ID: 1027
Table 7 Command output
Field Descri
p
tion
NIB ID ID of the next hop.
Users Number of ILM entries that use this next hop.
Status
Next hop status:
• Active—The next hop is active.
• Dummy—The next hop is inactive .
ECMP number Number of equal-cost NHLFE entries.
Outgoing NHLFE ID ID of the NHLFE entry using the next hop.
Backup outgoing NHLFE ID ID of the backup NHLFE entry.
display mpls nid
Use display mpls nid to display NID usage information.
Syntax
display mpls nid [ nid-value1 [ to nid-value2 ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
nid-value1: Specifies an NID. The value range for the nid-value1 argument is 0 to 65535. If used with the
nid-value2 argument, the nid-value1 argument represents the start NID of an NID range.
to nid-value2: Specifies the end NID of the NID range. The value range for the end NID is 0 to 65535.
If you specify an NID range by using the nid-value1 argument and the to nid-value2 option, the
command displays usage information for the specified range of NIDs.