HP MSR2000/3000/4000 Router Series MPLS Command Reference

189
snmp-agent trap enable l3vpn
Use snmp-agent trap enable l3vpn to enable SNMP notifications for MPLS L3VPN.
Use undo snmp-agent trap enable l3vpn to disable SNMP notifications for MPLS L3VPN.
Syntax
snmp-agent trap enable l3vpn
undo snmp-agent trap enable l3vpn
Default
SNMP notifications for MPLS L3VPN are enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature enables generating SNMP notifications for MPLS L3VPN when important events occur (for
example, when the maximum number of routes in a VPN instance is exceeded), as defined in RFC 4382.
The generated SNMP notifications are sent to the SNMP module. The SNMP module determines how to
output the notifications according to the configured output rules.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
Examples
# Enable SNMP notifications for MPLS L3VPN.
<Sysname> system-view
[Sysname] snmp-agent trap enable l3vpn
tnl-policy (VPN instance view/IPv4 VPN view/IPv6 VPN view)
Use tnl-policy to associate a VPN instance with a tunnel policy.
Use undo tnl-policy to remove the association.
Syntax
tnl-policy tunnel-policy-name
undo tnl-policy
Default
No tunnel policy is associated with a VPN instance.
Views
VPN instance view, IPv4 VPN view
Predefined user roles
network-admin