HP MSR2000/3000/4000 Router Series MPLS Command Reference

195
IPv6 MPLS L3VPN commands
This chapter describes only IPv6 MPLS L3VPN-specific commands. For information about the commands
available for both IPv4 MPLS L3VPN and IPv6 MPLS L3VPN, see "MPLS L3VPN commands."
address-family ipv6 (VPN instance view)
Use address-family ipv6 to enter IPv6 VPN view.
Use undo address-family ipv6 to remove all configurations from IPv6 VPN view.
Syntax
address-family ipv6
undo address-family ipv6
Views
VPN instance view
Predefined user roles
network-admin
Usage guidelines
In IPv6 VPN view, you can configure IPv6 VPN parameters such as inbound and outbound routing
policies.
Examples
# Enter IPv6 VPN view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] address-family ipv6
[Sysname-vpn-ipv6-vpn1]
Related commands
address-family ipv4 (VPN instance view)
address-family vpnv6
Use address-family vpnv6 to enter BGP VPNv6 address family view.
Use undo address-family vpnv6 to remove all settings from BGP VPNv6 address family view.
Syntax
address-family vpnv6
undo address-family vpnv6
Views
BGP view