HP MSR2000/3000/4000 Router Series MPLS Command Reference

200
Table 59 Command output
Field Descri
p
tion
Peer IP address of the peer.
Local IP address of the local router.
Type BGP link type: IBGP link or EBGP link.
BGP version BGP version of the peer.
remote router ID Router ID of the peer.
BGP current state Current state of the BGP session.
Up for Duration since the peer was established.
BGP current event Current event of the BGP session.
BGP last state
State that the BGP session was in before transitioning
to the current state.
Port Local and remote ports of the BGP session.
Configured
Settings of the local timers, including the active hold
interval and keepalive interval.
Received Received active hold interval.
Negotiated
Negotiated active hold interval and keepalive
interval.
Peer optional capabilities Optional capabilities of the peer.
Peer support bgp multi-protocol extended The peer supports multiprotocol extension.
Peer support bgp route refresh capability The peer supports route refresh capability.
Peer support bgp route AS4 capability The peer supports 4-byte AS number capability.
Address family IPv4 Unicast IPv4 unicast address family capability.
Address family VPNv6 VPNv6 address family capability.
Received
Total number of received messages and the number of
received update messages.
Sent
Total number of sent messages and the number of sent
update messages.
Maximum allowed prefix number
Maximum number of routes that can be learned from
the peer.
Threshold
Warning threshold. When the percentage of the
number of the received route prefixes to the maximum
number of routes supported reaches this threshold, the
device generates a prompt.
Optional capabilities Local optional capabilities.
ORF advertise capability based on prefix (type 64):
Supports the ORF address prefix capability, and the
capability value is 64.