HP MSR2000/3000/4000 Router Series MPLS Command Reference

15
mpls lsr-id
Use mpls lsr-id to configure an LSR ID for the local LSR.
Use undo mpls lsr-id to delete the LSR ID of the local LSR.
Syntax
mpls lsr-id lsr-id
undo mpls lsr-id
Default
An LSR has no LSR ID.
Views
System view
Predefined user roles
network-admin
Parameters
lsr-id: Specifies an ID for identifying the LSR, in dotted decimal notation.
Usage guidelines
HP recommends that you use the address of a loopback interface on the LSR as the LSR ID.
Examples
# Configure the LSR ID as 3.3.3.3 for the local node.
<Sysname> system-view
[Sysname] mpls lsr-id 3.3.3.3
Related commands
lsr-id
mpls mtu
Use mpls mtu to configure the MPLS MTU for an interface.
Use undo mpls mtu to restore the default.
Syntax
mpls mtu value
undo mpls mtu
Default
The MPLS MTU of an interface is not configured. Fragmentation for MPLS packets is based on the MTU
of the interface, and the length of a fragment does not include that of the MPLS label. Thus, after an MPLS
label is inserted into a fragment, the length of the MPLS fragment might exceed the interface MTU.
Views
Interface view