HP MSR2000/3000/4000 Router Series MPLS Command Reference

225
Destination address 127.0.0.1
100 bytes from 100.1.2.1: Sequence=1 time=49 ms Return Code=3(1)
Destination address 127.0.0.3
100 bytes from 100.1.2.1: Sequence=2 time=44 ms Return Code=3(1)
Destination address 127.0.0.1
100 bytes from 100.1.2.1: Sequence=3 time=60 ms Return Code=3(1)
Destination address 127.0.0.3
100 bytes from 100.1.2.1: Sequence=4 time=60 ms Return Code=3(1)
Destination address 127.0.0.1
100 bytes from 100.1.2.1: Sequence=5 time=76 ms Return Code=3(1)
Destination address 127.0.0.3
100 bytes from 100.1.2.1: Sequence=6 time=57 ms Return Code=3(1)
--- Ping statistics for FEC 3.3.3.9/32 ---
6 packets transmitted, 6 packets received, 0.0% packet loss
Round-trip min/avg/max = 44/57/76 ms
Table 66 Command output
Field Descri
p
tion
MPLS Ping FEC: 3.3.3.9/32 : 100 data bytes
Verify LSP connectivity for FEC 3.3.3.9/32 by sending
100-byte MPLS echo requests.
Destination address Destination IP address in the IP header.
100 bytes from 100.1.2.1 Received a 100-byte reply from 100.1.2.1.
Sequence
Sequence number of the reply, for determination of packet
loss, disorder, or duplicate.
time Packet round-trip delay.
Return Code
Return code. The number in parentheses represents a return
subcode.
Ping statistics for FEC 3.3.3.9/32 LSP verification statistics.
5 packets transmitted Number of MPLS echo requests sent.
5 packets received Number of MPLS echo replies received.
0.0% packet loss
Percentage of the unreplied packets to the total request
packets.
Round-trip min/avg/max Minimum, average, and maximum round-trip delay.
tracert mpls ipv4
Use tracert mpls ipv4 to trace MPLS LSPs from the ingress node to the egress node for an IPv4 prefix. You
can locate the error node according to the reply information.