HP MSR2000/3000/4000 Router Series MPLS Command Reference

19
Static LSP commands
display mpls static-lsp
Use display mpls static-lsp to display static LSP information.
Syntax
display mpls static-lsp [ lsp-name lsp-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
lsp-name lsp-name: Specifies a static LSP by its name, a case-sensitive string of 1 to 15 characters. If you
do not specify a static LSP, the command displays information about all static LSPs.
Examples
# Display information about all static LSPs.
<Sysname> display mpls static-lsp
Total: 4
Name FEC In/Out Label Nexthop/Out Interface State
egress123 -/- 16/NULL - Up
ingress123 202.118.224.132/32 NULL/1022 100.100.100.19 Down
transit123 -/- 32/1022 100.100.100.17 Down
transit124 -/- 34/1020 POS1/1 Down
Table 9 Command output
Field Descri
p
tion
Total Total number of static LSPs.
Name Name of the static LSP.
FEC Forwarding equivalence class—IP prefix and the prefix length.
In/Out Label Incoming label/outgoing label.
static-lsp egress
Use static-lsp egress to configure the egress node of a static LSP.
Use undo static-lsp egress to delete the egress node configuration for a static LSP.
Syntax
static-lsp egress lsp-name in-label in-label