HP MSR2000/3000/4000 Router Series MPLS Command Reference

31
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays information about all LDP interfaces.
Examples
# Display information about all LDP interfaces.
<Sysname> display mpls ldp interface
Interface MPLS LDP Auto-config
Eth1/2 Enabled Configured -
XGE2/6 Enabled Configured -
Table 14 Command output
Field Descri
p
tion
Interface Interface enabled with LDP.
MPLS Whether the interface is enabled with MPLS.
LDP Whether the interface is configured with the mpls ldp enable command.
Auto-config
LDP automatic configuration information:
• If LDP autoconfiguration is enabled, this field displays IGP process
information, such as OSPF process ID and OSPF area ID.
• If LDP autoconfiguration is disabled, this field displays a hyphen (-).
Related commands
• mpls ldp
• mpls ldp enable
display mpls ldp lsp
Use display mpls ldp lsp to display information about LSPs generated by LDP.
Syntax
display mpls ldp lsp [ vpn-instance vpn-instance-name ] [ destination-address mask-length ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. The command displays LDP LSP information for the specified VPN. If you do not
specify a VPN instance, the command displays LDP LSP information for the public network.