4000 Router Series MPLS Command Reference

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. The command displays the LDP running parameters for the specified VPN. If you

do not specify a VPN instance, the command displays the LDP running parameters for the public

network.

Examples

# Display LDP running parameters for the public network.

<Sysname> display mpls ldp parameter

Global Parameters:

Protocol Version : V1

Nonstop Routing : Off Graceful Restart : Off

Reconnect Time : 120 sec Forwarding State Hold Time: 360 sec

Instance Parameters:

Instance ID : 0 Instance State : Active

LSR ID : 0.0.0.0

Loop Detection : Off

Hop Count Limit : 32 Path Vector Limit : 32

Label Retention Mode: Liberal Label Distribution Control Mode: Ordered

IGP Sync Delay : 0 sec IGP Sync Delay on Restart : -

Table 16 Command output

Field Descri

tion

Global Parameters Global parameters for all LDP-enabled networks.

Protocol Version LDP protocol version.

Nonstop Routing

Whether the nonstop routing function is enabled.

• On—Enabled.

• Off—Disabled.

Graceful Restart

Whether the GR function is enabled.

• On—Enabled.

• Off—Disabled.

Reconnect Time Value of the Reconnect timer, in seconds.

Forwarding State Hold Time Value of the MPLS Forwarding State Holding timer, in seconds.

Instance Parameters Running parameters for a specific VPN instance or public network.

Instance ID VPN instance ID. For the public network, this field displays 0.

Instance State LDP status in the VPN instance, Active or Inactive.

LSR ID LSR ID of the local device.