HP MSR2000/3000/4000 Router Series MPLS Command Reference

34
Field Descri
p
tion
Loop Detection
Whether loop detection is enabled.
• On—Enabled.
• Off—Disabled.
Hop Count Limit Hop count limit specified for loop detection.
Path Vector Limit Path Vector length limit specified for loop detection.
Label Retention Mode The device supports only the Liberal mode.
IGP Sync Delay
Delay time (in seconds) that LDP must wait before it notifies IGP of an
LDP session-up event.
IGP Sync Delay on Restart
Delay time (in seconds) that LDP must wait before it notifies IGP of an
LDP session-up event in case of LDP restart.
display mpls ldp peer
Use display mpls ldp peer to display the LDP peer and session information.
Syntax
display mpls ldp peer [ vpn-instance vpn-instance-name ] [ peer-lsr-id ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. The command displays LDP peer and session information for the specified VPN. If
you do not specify a VPN instance, the command displays the LDP peer and session information of the
public network.
peer peer-lsr-id: Specifies an LDP peer by its LSR ID. If you do not specify this option, the command
displays all LDP peers and related session information.
verbose: Displays detailed LDP peer and session information. If you do not specify this keyword, the
command displays brief LDP peer and session information.
Examples
# Display brief information about all LDP peers and LDP sessions for the public network.
<Sysname> display mpls ldp peer
Total number of peers: 1
Peer LDP ID State Role GR MD5 KA Sent/Rcvd
2.2.2.9:0 Operational Passive Off Off 39/39
Table 17 Command output
Field Descri
p
tion
Peer LDP ID LDP identifier of the peer.