HP MSR2000/3000/4000 Router Series MPLS Command Reference

53
MPLS TE commands
disable
Use disable to disable the current explicit path.
Use undo disable to restore the default.
Syntax
disable
undo disable
Default
The explicit path is enabled.
Views
Explicit path view
Predefined user roles
network-admin
Usage guidelines
You can use the disable command to prevent an explicit path from being used by a tunnel during explicit
path configuration.
Examples
# Disable the explicit path named path1.
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1] disable
display explicit-path
Use display explicit-path to display information about explicit paths.
Syntax
display explicit-path [ path-name ]
Views
Any view
Predefined user roles
network-admin
network-operator