4000 Router Series MPLS Command Reference

Related commands

• mpls te max-link-bandwidth

• mpls te max-reservable-bandwidth

• mpls te max-reservable-bandwidth mam

• mpls te max-reservable-bandwidth rdm

display mpls te tunnel-interface

Use display mpls te tunnel-interface to display information about MPLS TE tunnel interfaces.

Syntax

display mpls te tunnel-interface [ tunnel number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

tunnel number: Displays information about the tunnel interface specified by its number. The value range

for the number argument is 0 to 1023. If you do not specify this option, this command displays

information about all MPLS TE tunnel interfaces.

Examples

# Display information about all MPLS TE tunnel interfaces.

<Sysname> display mpls te tunnel-interface

Tunnel Name : Tunnel 0

Tunnel State : Up (Main CRLSP up)

Tunnel Attributes :

LSP ID : 1 Tunnel ID : 0

Admin State : Normal

Ingress LSR ID : 1.1.1.1 Egress LSR ID : 3.3.3.3

Signaling : Static Static CRLSP Name : static-cr-lsp-1

Resv Style : -

Tunnel mode : -

Reverse-LSP name : -

Reverse-LSP LSR ID : - Reverse-LSP Tunnel ID: -

Class Type : - Tunnel Bandwidth : -

Reserved Bandwidth : -

Setup Priority : 0 Holding Priority : 0

Affinity Attr/Mask : -/-

Explicit Path : -

Backup Explicit Path : -

Metric Type : IGP

Record Route : - Record Label : -

FRR Flag : - Backup Bandwidth Flag: -