HP MSR2000/3000/4000 Router Series MPLS Command Reference

59
Field Descri
p
tion
Class Type CT of the tunnel: CT 0, CT 1, CT 2, or CT 3.
Tunnel Bandwidth Bandwidth required by the tunnel, in kbps.
Reserved Bandwidth Bandwidth reserved for the tunnel, in kbps.
Setup Priority Tunnel setup priority.
Holding Priority Tunnel holding priority.
Affinity Attr/Mask Tunnel affinity attribute and mask.
Explicit Path Name Name of the explicit path referenced by the tunnel.
Backup Explicit Path Name of the explicit path referenced by the backup tunnel.
Metric Type
Link metric type used for tunnel path selection: TE or IGP.
The device does not support the TE metric type in the current software
version.
Backup Bandwidth Flag
Whether the bandwidth and the type of CRLSPs that the bypass tunnel can
protect have been configured (by using the mpls te backup bandwidth
command):
• Enabled—Configured.
• Disabled—Not configured.
Backup Bandwidth Type
Class type of the traffic on the primary tunnel that the bypass tunnel can
protect.
Backup Bandwidth Bandwidth that the bypass tunnel can protect, in kbps.
Retry Limit Maximum number of tunnel setup retries.
Retry Interval Tunnel setup retry interval, in seconds.
Reoptimization Freq Tunnel reoptimization frequency, in seconds.
Backup Type
CRLSP backup mode:
• None—CRLSP backup is disabled.
• Hot Standby
• Ordinary
Backup LSP ID LSP ID of the backup tunnel.
Auto Bandwidth
State of the automatic bandwidth adjustment function. The device does not
support this function in the current software version.
Auto Bandwidth Freq Automatic bandwidth adjustment interval, in seconds.
Min Bandwidth
Minimum bandwidth (in kbps) that can be applied to the tunnel by
automatic bandwidth adjustment.
Max Bandwidth
Maximum bandwidth (in kbps) that can be applied to the tunnel by
automatic bandwidth adjustment.
Collected Bandwidth Current output rate, in kbps.
ds-te bc-model
Use ds-te bc-model to specify the bandwidth constraint (BC) model used in IETF DS-TE.
Use undo ds-te bc-model to restore the default.