HP MSR2000/3000/4000 Router Series MPLS Command Reference

73
[Sysname] interface tunnel 0 mode mpls-te
[Sysname-Tunnel0] destination 10.0.0.1
[Sysname-Tunnel0] mpls te bidirectional co-routed passive reverse-lsp lsr-id 10.0.0.1
tunnel-id 1
Related commands
display mpls te tunnel-interface
mpls te enable
Use mpls te enable to enable MPLS TE for an interface.
Use undo mpls te enable to disable MPLS TE on an interface.
Syntax
mpls te enable
undo mpls te enable
Default
MPLS TE is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
After you enable MPLS TE for an interface by using the mpls te enable command, the interface can serve
as part of an MPLS TE tunnel.
After you execute the undo mpls te enable command on an interface, MPLS TE is disabled on the
interface and all CRLSPs on the interface are deleted.
Examples
# Enable MPLS TE for interface Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mpls te enable
Related commands
• display mpls te link-management bandwidth-allocation
• mpls te
mpls te fast-reroute
Use mpls te fast-reroute to enable the fast reroute (FRR) function.
Use undo mpls te fast-reroute to disable FRR.
Syntax
mpls te fast-reroute