HP MSR2000/3000/4000 Router Series MPLS Command Reference

85
mpls te resv-style
Use mpls te resv-style to configure the resource reservation style for the MPLS TE tunnel.
Use undo mpls te resv-style to restore the default.
Syntax
mpls te resv-style { ff | se }
undo mpls te resv-style
Default
The resource reservation style is SE.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
ff: Specifies the resource reservation style as fixed filter (FF).
se: Specifies the resource reservation style as shared explicit (SE).
Usage guidelines
FF—Resources are reserved for individual senders and cannot be shared among senders on the same
session.
SE—Resources are reserved for senders on the same session and shared among them.
This command applies only to MPLS TE tunnels established by RSVP-TE.
Bidirectional MPLS TE tunnels established by RSVP-TE always use the FF style.
Examples
# Use the FF reservation style to establish MPLS TE tunnel 0.
<Sysname> system-view
[Sysname] interface tunnel 0 mode mpls-te
[Sysname-Tunnel0] mpls te resv-style ff
Related commands
• display mpls te tunnel-interface
• mpls te signaling
mpls te retry
Use mpls te retry to configure the maximum number of tunnel setup attempts.
Use undo mpls te retry to restore the default.
Syntax
mpls te retry times
undo mpls te retry