HP MSR2000/3000/4000 Router Series MPLS Configuration Guide

98
Step Command Remarks
2. Enter interface view.
interface interface-type
interface-number
You must enable RSVP on the
interface.
3. Enable BFD for the RSVP
neighbor on the interface.
rsvp bfd enable By default, RSVP BFD is disabled.
Displaying and maintaining RSVP
Execute display commands in any view and reset commands in user view.
Task Command
Display RSVP information.
display rsvp [ interface [ interface-type
interface-number ] ]
Display information about the security associations
established with RSVP neighbors.
display rsvp authentication [ from ip-address ] [ to
ip-address ] [ verbose ]
Display information about CRLSPs established through
RSVP.
display rsvp lsp [ destination ip-address ] [ source
ip-address ] [ tunnel-id tunnel-id ] [ lsp-id lsp-id ]
[ verbose ]
Display information about RSVP neighbors.
display rsvp peer [ interface interface-type
interface-number ] [ ip ip-address ] [ verbose ]
Display information about RSVP resource reservation
requests sent to upstream devices.
display rsvp request [ destination ip-address ] [ source
ip-address ] [ tunnel-id tunnel-id ] [ prev-hop
ip-address ] [ verbose ]
Display information about RSVP resource reservation
states.
display rsvp reservation [ destination ip-address ]
[ source ip-address ] [ tunnel-id tunnel-id ] [ nexthop
ip-address ] [ verbose ]
Display information about RSVP path states.
display rsvp sender [ destination ip-address ] [ source
ip-address ] [ tunnel-id tunnel-id ] [ lsp-id lsp-id ]
[ verbose ]
Display RSVP statistics.
display rsvp statistics [ interface [ interface-type
interface-number ] ]
Clear RSVP security associations.
reset rsvp authentication [ from ip-address to
ip-address ]
Clear RSVP statistics.
reset rsvp statistics [ interface [ interface-type
interface-number ]