HP MSR2000/3000/4000 Router Series MPLS Configuration Guide

9
Enabling sending of MPLS TTL-expired messages
This feature enables an LSR to generate an ICMP TTL-expired message upon receiving an MPLS packet
with a TTL of 1. If the MPLS packet has only one label, the LSR sends the ICMP TTL-expired message back
to the source through IP routing. If the MPLS packet has multiple labels, the LSR sends it along the LSP to
the egress, which then sends the message back to the source.
To enable sending of MPLS TTL-expired messages:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable sending of MPLS
TTL-expired messages.
mpls ttl expiration enable
By default, this function is enabled.
Enabling SNMP notifications for MPLS
This feature enables MPLS to generate SNMP notifications. The generated SNMP notifications are sent to
the SNMP module.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
To enable SNMP notifications for MPLS:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable SNMP notifications
for MPLS.
snmp-agent trap enable mpls
By default, SNMP notifications for
MPLS are enabled.
Displaying and maintaining MPLS
Execute display commands in any view.
Task Command
Display MPLS interface information. display mpls interface [ interface-type interface-number ]
Display usage information about MPLS labels. display mpls label { label-value1 [ to label-value2 ] | all }
Display LSP information.
display mpls lsp [ egress | in-label label-value | ingress |
outgoing-interface interface-type interface-number |
protocol { bgp | ldp | local | rsvp-te | static | static-cr }
| transit ] [ vpn-instance vpn-instance-name ] [ ipv4-dest
mask-length | ipv6 [ ipv6-dest prefix-length ] ] [ verbose ]
Display MPLS Nexthop Information Base (NIB)
information.
display mpls nib [ nib-id ]
Display usage information about NIDs. display mpls nid [ nid-value1 [ to nid-value2 ] ]
Display MPLS summary information. display mpls summary