4000 Router Series MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

161

162

163

164

165

166

167

168

169

170

158

[PE1-vpn-instance-vpn1] route-distinguisher 100:1

[PE1-vpn-instance-vpn1] vpn-target 111:1

[PE1-vpn-instance-vpn1] quit

[PE1] ip vpn-instance vpn2

[PE1-vpn-instance-vpn2] route-distinguisher 100:2

[PE1-vpn-instance-vpn2] vpn-target 222:2

[PE1-vpn-instance-vpn2] quit

[PE1] interface ethernet 1/1

[PE1-Ethernet1/1] ip binding vpn-instance vpn1

[PE1-Ethernet1/1] ip address 10.1.1.2 24

[PE1-Ethernet1/1] quit

[PE1] interface ethernet 1/2

[PE1-Ethernet1/2] ip binding vpn-instance vpn2

[PE1-Ethernet1/2] ip address 10.2.1.2 24

[PE1-Ethernet1/2] quit

# Configure PE 2.

[PE2] ip vpn-instance vpn1

[PE2-vpn-instance-vpn1] route-distinguisher 200:1

[PE2-vpn-instance-vpn1] vpn-target 111:1

[PE2-vpn-instance-vpn1] quit

[PE2] ip vpn-instance vpn2

[PE2-vpn-instance-vpn2] route-distinguisher 200:2

[PE2-vpn-instance-vpn2] vpn-target 222:2

[PE2-vpn-instance-vpn2] quit

[PE2] interface ethernet 1/1

[PE2-Ethernet1/1] ip binding vpn-instance vpn1

[PE2-Ethernet1/1] ip address 10.3.1.2 24

[PE2-Ethernet1/1] quit

[PE2] interface ethernet 1/2

[PE2-Ethernet1/2] ip binding vpn-instance vpn2

[PE2-Ethernet1/2] ip address 10.4.1.2 24

[PE2-Ethernet1/2] quit

# Configure IP addresses for the CEs according to Figure 49. (Details not shown.)

After completing the configurations, execute the display ip vpn-instance command on the PEs to

display the configuration of the VPN instance. Use the ping command to test connectivity between

the PEs and their attached CEs. The PEs can ping their attached CEs. Take PE 1 and CE 1 as an

example:

[PE1] display ip vpn-instance

Total VPN-Instances configured : 2

VPN-Instance Name RD Create time

vpn1 100:1 2012/02/13 12:49:08

vpn2 100:2 2012/02/13 12:49:20

[PE1] ping -vpn-instance vpn1 10.1.1.1

Ping 10.1.1.1 (10.1.1.1): 56 data bytes, press escape sequence to break

56 bytes from 10.1.1.1: icmp_seq=0 ttl=255 time=1.000 ms

56 bytes from 10.1.1.1: icmp_seq=1 ttl=255 time=2.000 ms

56 bytes from 10.1.1.1: icmp_seq=2 ttl=255 time=0.000 ms

56 bytes from 10.1.1.1: icmp_seq=3 ttl=255 time=1.000 ms