4000 Router Series MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

191

192

193

194

195

196

197

198

199

200

191

<PE3> system-view

[PE3] interface loopback 0

[PE3-LoopBack0] ip address 1.1.1.9 32

[PE3-LoopBack0] quit

[PE3] mpls lsr-id 1.1.1.9

[PE3] mpls ldp

[PE3-ldp] quit

[PE3] isis 2

[PE3-isis-2] network-entity 10.0000.0000.0000.0001.00

[PE3-isis-2] quit

[PE3] interface loopback 0

[PE3-LoopBack0] isis enable 2

[PE3-LoopBack0] quit

[PE3] interface pos 5/1

[PE3-POS5/1] ip address 10.1.1.1 24

[PE3-POS5/1] isis enable 2

[PE3-POS5/1] mpls enable

[PE3-POS5/1] mpls ldp enable

[PE3-POS5/1] quit

# Configure CE 1.

<CE1> system-view

[CE1] interface loopback 0

[CE1-LoopBack0] ip address 2.2.2.9 32

[CE1-LoopBack0] quit

[CE1] mpls lsr-id 2.2.2.9

[CE1] mpls ldp

[CE1-ldp] quit

[CE1] isis 2

[CE1-isis-2] network-entity 10.0000.0000.0000.0002.00

[CE1-isis-2] quit

[CE1] interface loopback 0

[CE1-LoopBack0] isis enable 2

[CE1-LoopBack0] quit

[CE1] interface pos 5/0

[CE1-POS5/0] ip address 10.1.1.2 24

[CE1-POS5/0] isis enable 2

[CE1-POS5/0] mpls enable

[CE1-POS5/0] mpls ldp enable

[CE1-POS5/0] quit

After the configurations, an LDP session and IS-IS neighbor relationship can be established

between PE 3 and CE 1.

# Configure PE 4 and CE 2 in the same way that PE 3 and CE 1 are configured. (Details not

shown.)

3. Connect CE 1 and CE 2 to service provider PEs:

# Configure PE 1.

[PE1] ip vpn-instance vpn1

[PE1-vpn-instance-vpn1] route-distinguisher 200:1