4000 Router Series MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

201

202

203

204

205

206

207

208

209

210

200

[UPE1-bgp-vpn2] peer 10.4.1.1 as-number 65420

[UPE1-bgp-vpn2] address-family ipv4 unicast

[UPE1-bgp-ipv4-vpn2] peer 10.4.1.1 enable

[UPE1-bgp-ipv4-vpn2] import-route direct

[UPE1-bgp-ipv4-vpn2] quit

[UPE1-bgp-vpn2] quit

[UPE1-bgp] quit

2. Configure CE 1:

<CE1> system-view

[CE1] interface ethernet 1/1

[CE1-Ethernet1/1] ip address 10.2.1.1 255.255.255.0

[CE1-Ethernet1/1] quit

[CE1] bgp 65410

[CE1-bgp] peer 10.2.1.2 as-number 100

[CE1-bgp] address-family ipv4 unicast

[CE1-bgp-ipv4] peer 10.2.1.2 enable

[CE1-bgp-ipv4] import-route direct

[CE1-bgp-ipv4] quit

[CE1-bgp] quit

3. Configure CE 2:

<CE2> system-view

[CE2] interface ethernet 1/1

[CE2-Ethernet1/1] ip address 10.4.1.1 255.255.255.0

[CE2-Ethernet1/1] quit

[CE2] bgp 65420

[CE2-bgp] peer 10.4.1.2 as-number 100

[CE2-bgp] address-family ipv4 unicast

[CE2-bgp-ipv4] peer 10.4.1.2 enable

[CE2-bgp-ipv4] import-route direct

[CE2-bgp-ipv4] quit

[CE2-bgp] quit

4. Configure UPE 2:

# Configure basic MPLS and MPLS LDP to establish LDP LSPs.

<UPE2> system-view

[UPE2] interface loopback 0

[UPE2-LoopBack0] ip address 4.4.4.9 32

[UPE2-LoopBack0] quit

[UPE2] mpls lsr-id 4.4.4.9

[UPE2] mpls ldp

[UPE2-ldp] quit

[UPE2] interface ethernet 1/1

[UPE2-Ethernet1/1] ip address 172.2.1.1 24

[UPE2-Ethernet1/1] mpls enable

[UPE2-Ethernet1/1] mpls ldp enable

[UPE2-Ethernet1/1] quit

# Configure the IGP protocol (OSPF, in this example).

[UPE2] ospf