4000 Router Series MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

211

212

213

214

215

216

217

218

219

220

210

1. Configure VPN instances on the MCE and PE 1:

# On the MCE, configure VPN instances vpn1 and vpn2, and specify an RD and route targets for

each VPN instance.

<MCE> system-view

[MCE] ip vpn-instance vpn1

[MCE-vpn-instance-vpn1] route-distinguisher 10:1

[MCE-vpn-instance-vpn1] vpn-target 10:1

[MCE-vpn-instance-vpn1] quit

[MCE] ip vpn-instance vpn2

[MCE-vpn-instance-vpn2] route-distinguisher 20:1

[MCE-vpn-instance-vpn2] vpn-target 20:1

[MCE-vpn-instance-vpn2] quit

# Bind interface Ethernet 1/1 with VPN instance vpn1, and configure an IP address for the

interface.

[MCE] interface ethernet 1/1

[MCE-Ethernet1/1] ip binding vpn-instance vpn1

[MCE-Ethernet1/1] ip address 10.214.10.3 24

[MCE-Ethernet1/1] quit

# Bind interface Ethernet 1/2 with VPN instance vpn2, and configure an IP address for the

interface.

[MCE] interface ethernet 1/2

[MCE-Ethernet1/2] ip binding vpn-instance vpn2

[MCE-Ethernet1/2] ip address 10.214.20.3 24

[MCE-Ethernet1/2] quit

# On PE 1, configure VPN instances vpn1 and vpn2, and specify an RD and route targets for each

VPN instance.

<PE1> system-view

[PE1] ip vpn-instance vpn1

[PE1-vpn-instance-vpn1] route-distinguisher 30:1

[PE1-vpn-instance-vpn1] vpn-target 10:1

[PE1-vpn-instance-vpn1] quit

[PE1] ip vpn-instance vpn2

[PE1-vpn-instance-vpn2] route-distinguisher 40:1

[PE1-vpn-instance-vpn2] vpn-target 20:1

[PE1-vpn-instance-vpn2] quit

2. Configure routing between the MCE and VPN sites:

The MCE is connected to VPN 1 directly, and no routing protocol is enabled in VPN 1. Therefore,

you can configure static routes.

# On VR 1, assign IP address 10.214.10.2/24 to the interface connected to MCE and

192.168.0.1/24 to the interface connected to VPN 1. (Details not shown.)

# On VR 1, configure a default route with the next hop as 10.214.10.3.

<VR1> system-view

[VR1] ip route-static 0.0.0.0 0.0.0.0 10.214.10.3

# On the MCE, configure a static route to 192.168.0.0/24, specify the next hop as 10.214.10.2,

and bind the static route with VPN instance vpn1.

[MCE] ip route-static vpn-instance vpn1 192.168.0.0 24 10.214.10.2