4000 Router Series MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

261

262

263

264

265

266

267

268

269

270

262

[PE2-LoopBack0] quit

# Create VPN instance vpn1, and configure the RD and route target attributes for it.

[PE2] ip vpn-instance vpn1

[PE2-vpn-instance-vpn1] route-distinguisher 11:11

[PE2-vpn-instance-vpn1] vpn-target 3:3 import-extcommunity

[PE2-vpn-instance-vpn1] vpn-target 3:3 export-extcommunity

[PE2-vpn-instance-vpn1] quit

# Configure interface Loopback 1, and bind the interface to VPN instance vpn1.

[PE2] interface loopback 1

[PE2-LoopBack1] ip binding vpn-instance vpn1

[PE2-LoopBack1] ipv6 address 2001:1::2 128

[PE2-LoopBack1] quit

# Start BGP.

[PE2] bgp 600

# Enable the capability to advertise labeled routes to and receive labeled routes from IBGP peer

4.4.4.9.

[PE2-bgp] peer 4.4.4.9 as-number 600

[PE2-bgp] peer 4.4.4.9 connect-interface loopback 0

[PE2-bgp] address-family ipv4 unicast

[PE2-bgp-ipv4] peer 4.4.4.9 enable

[PE2-bgp-ipv4] peer 4.4.4.9 label-route-capability

[PE2-bgp-ipv4] quit

# Configure the maximum hop count from PE 2 to EBGP peer 2.2.2.9 as 10.

[PE2-bgp] peer 2.2.2.9 as-number 100

[PE2-bgp] peer 2.2.2.9 connect-interface loopback 0

[PE2-bgp] peer 2.2.2.9 ebgp-max-hop 10

# Configure peer 2.2.2.9 as a VPNv6 peer.

[PE2-bgp] address-family vpnv6

[PE2-bgp-af-vpnv6] peer 2.2.2.9 enable

[PE2-bgp-af-vpnv6] quit

# Redistribute direct routes to the routing table of VPN instance vpn1.

[PE2-bgp] ip vpn-instance vpn1

[PE2-bgp-vpn1] address-family ipv6 unicast

[PE2-bgp-ipv6-vpn1] import-route direct

[PE2-bgp-ipv6-vpn1] quit

[PE2-bgp-vpn1] quit

[PE2-bgp] quit

Verifying the configuration

# PE 1 and PE 2 can ping each other. Take PE 1 as an example:

[PE1] ping ipv6 -a 2001:1::1 -vpn-instance vpn1 2001:1::2

Ping6(56 bytes) 2001:1::1 --> 2001:1::2, press escape sequence to break

56 bytes from 2001:1::2, icmp_seq=0 hlim=64 time=6.000 ms

56 bytes from 2001:1::2, icmp_seq=1 hlim=64 time=1.000 ms

56 bytes from 2001:1::2, icmp_seq=2 hlim=64 time=1.000 ms

56 bytes from 2001:1::2, icmp_seq=3 hlim=64 time=3.000 ms

56 bytes from 2001:1::2, icmp_seq=4 hlim=64 time=3.000 ms