HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

136
Parameters
contact: Displays the system contact.
location: Displays the physical location of the device.
version: Displays the SNMP agent version.
Usage guidelines
If none of the parameters is specified, this command displays all SNMP agent system information.
Examples
# Display all SNMP agent system information.
<Sysname> display snmp-agent sys-info
The contact information of the agent:
The location information of the agent:
The SNMP version of the agent:
SNMPv3
Related commands
snmp-agent sys-info
display snmp-agent trap queue
Use display snmp-agent trap queue to display basic information about the trap queue, including the trap
queue name, queue size, and number of traps in the queue.
Syntax
display snmp-agent trap queue
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the trap queue configuration and usage status.
<Sysname> display snmp-agent trap queue
Queue size: 100
Message number: 6
Related commands
• snmp-agent trap life
• snmp-agent trap queue-size