HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

137
display snmp-agent trap-list
Use display snmp-agent trap-list to display modules that can generate SNMP notifications and their
notification function status (enable or disable).
Syntax
display snmp-agent trap-list
Views
Any view
Usage guidelines
You can use the snmp-agent trap enable command to enable or disable the notification function of a
module. For a module that has sub-modules, the notification function status is enable if the trap function
of any of its sub-modules is enabled.
Examples
# Display the modules that can generate notification and their notification function status.
<Sysname> display snmp-agent trap-list
arp notification is disabled.
configuration notification is enabled.
l3vpn notification is enabled.
mpls notification is enabled.
standard notification is enabled.
system notification is enabled.
Enabled notifications: 5; Disabled notifications: 1
Related commands
snmp-agent trap enable
display snmp-agent usm-user
Use display snmp-agent usm-user to display SNMPv3 user information.
Syntax
display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
engineid engineid: Displays SNMPv3 user information for the SNMP engine ID identified by engineid.
When an SNMPv3 user is created, the system records the local SNMP entity engine ID. The user
becomes invalid when the engine ID changes and becomes valid again when the recorded engine ID is
restored.