HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

198
Field Descri
p
tion
IPL2 flow entries been counted Number of Layer 2 and Layer 3 flows that have been counted.
Last statistics reset time
Last time when the statistics were cleared.
The time is displayed only when the reset ip netstream statistics
command has been executed. Otherwise, the value for this field is
Never.
IP packet size distribution (1103746
packets in total)
Distribution of IP packets by packet size, and the bracketed number is
the total number of IP packets.
The value is displayed in the proportion of the number of IP packets of
the specified sizes to the total number of IP packets, and the value is
displayed with 3 decimal places.
1-32 64 96 128 160 192 224
256 288
320 352 384 416 448 480 512
544 576
1024 1536 2048 2560 3072 3584
4096 4608
Range of IP packet length (excluding data link layer header) in bytes.
For the values in the range of 1 to 576, the range increases in the step
of 32. For example, 1-32 shows the number of packets with the size of
1 to 32 bytes, and 64 shows the number of packets with the size of 33
to 64 bytes. For the values greater than 1024, the range increases in
the step of 512. For example, 1536 shows the number of packets with
the size of 1025 to 1536 bytes. Packets with the size of 577 to 1024
bytes are recorded in the 1024 entry.
Protocol Total Flows Packets /sec
Flows/sec Packets/flow
Active(sec)/flow Idle(sec)/flow
Statistics of packets by protocol type, including protocol type, total
number of flows, number of packets per second, number of flows per
second, number of packets per flow, active time of each flow, inactive
time of each flow.
Type DstIP(Port) SrcIP(Port)
Pro ToS If(Direct) Pkts
Statistics of the active flows in the current cache, including flow type,
destination IP address (destination port), source IP address (source
port), protocol number, ToS, interface type and name (direction), and
the number of packets.
Flows are classified into the following types: IP flows, L2 flows, IP&L2
flows, MPLS flows with no IP options, and MPLS flows with IP options.
ICMP packets do not contain port number fields, so the type and code
fields are captured. The value for the destination port represents these
two fields. More specifically, the highest 8 bits represent the type field,
and the lowest 8 bits represent the code field. The value for the source
port is set to 0 and does not indicate any statistics.
DstMAC(VLAN) SrcMAC(VLAN)
Layer 2 information of the active flows in the current cache, including
destination MAC address, destination VLAN ID, source MAC
address, and source VLAN ID.
TopLblType(IP/Mask) Lbl-Exp-S-List
Information about the active MPLS flows in the current cache,
including type of the labels at the top of the label stack (IP address and
mask associated with the label) and label list.
Up to three labels can be listed in one label list.