HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

203
Syntax
enable
undo enable
Default
No NetStream aggregation is enabled.
Views
NetStream aggregation view
Predefined user roles
network-admin
Examples
# Enable NetStream AS aggregation.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as] enable
Related commands
ip netstream aggregation
ip netstream
Use ip netstream to enable NetStream on the specified interface.
Use undo ip netstream to disable NetStream on the specified interface.
Syntax
ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
Default
NetStream is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
inbound: Enables NetStream for incoming traffic.
outbound: Enables NetStream for outgoing traffic.
Examples
# Enable NetStream for incoming traffic on interface Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ip netstream inbound