4000 Router Series Network Management and Monitoring Command Reference

207

Examples

# Allow a maximum of 10 packets to be exported per second.

<Sysname> system-view

[Sysname] ip netstream export rate 10

ip netstream export source

Use ip netstream export source to configure the source interface for the NetStream data export.

Use undo ip netstream export source to remove the configuration.

Syntax

ip netstream export source interface interface-type interface-number

undo ip netstream export source

Default

The interface out of which the NetStream data is sent is used as the source interface.

Views

System view, NetStream aggregation view

Predefined user roles

network-admin

Parameters

interface-type interface-number: Specifies a source interface by its type and number for the NetStream

data export.

Usage guidelines

When the ip netstream export source command is executed, the source IP address for the NetStream

data export is the IP address of the configured source interface.

Different source interfaces can be configured in different NetStream aggregation views.

If no source interface is configured in NetStream aggregation view, the source interface configured in

system view is used.

Examples

# Configure the source interface for the NetStream data export as Ethernet 1/1.

<Sysname> system-view

[Sysname] ip netstream export source interface ethernet 1/1

Related commands

ip netstream aggregation

ip netstream export v9-template refresh-rate packet

Use ip netstream export v9-template refresh-rate packet to configure the refresh frequency for

NetStream version 9 templates so that the templates are sent after the specified number of packets are

sent.

Use undo ip netstream export v9-template refresh-rate packet to restore the default.