HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

213
outbound: Enables NetStream sampling in the outbound direction.
Examples
# Enable NetStream sampling in the inbound direction of Ethernet 1/1 by referencing sampler abc.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ip netstream inbound
[Sysname-Ethernet1/1] ip netstream sampler abc inbound
ip netstream timeout active
Use ip netstream timeout active to set the aging timer for active flows.
Use undo ip netstream timeout active to restore the default.
Syntax
ip netstream timeout active minutes
undo ip netstream timeout active
Default
The aging timer is 30 minutes for active flows.
Views
System view
Predefined user roles
network-admin
Parameters
minutes: Sets the aging timer for active flows, in the range of 1 to 60 minutes.
Usage guidelines
A flow is considered active if packets for this NetStream entry arrive in a specific period of time that is
called an aging timer for active flows.
Examples
# Set the aging timer to 60 minutes for active flows.
<Sysname> system-view
[Sysname] ip netstream timeout active 60
Related commands
ip netstream timeout inactive
ip netstream timeout inactive
Use ip netstream timeout inactive to set the aging timer for inactive flows.
Use undo ip netstream timeout inactive to restore the default.
Syntax
ip netstream timeout inactive seconds
undo ip netstream timeout inactive