HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

214
Default
The aging timer is 30 seconds for inactive flows.
Views
System view
Predefined user roles
network-admin
Parameters
seconds: Sets the aging timer for inactive flows, in the range of 10 to 600 seconds.
Usage guidelines
A flow is considered inactive if no packet for this NetStream entry arrives in a specific period of time that
is called an aging timer for inactive flows.
Examples
# Set the aging timer to 60 seconds for inactive flows.
<Sysname> system-view
[Sysname] ip netstream timeout inactive 60
Related commands
ip netstream timeout active
reset ip netstream statistics
Use reset ip netstream statistics to age out all flows in the cache, export NetStream data, and clear the
cache.
Syntax
reset ip netstream statistics
Views
User view
Predefined user roles
network-admin
Usage guidelines
When you execute the command, messages appear telling you that the process of clearing the cache
takes several minutes and the system does not perform NetStream data collection during this process.
Examples
# Age out, export all NetStream data, and clear the cache.
<Sysname> reset ip netstream statistics
This process may take a few minutes.
Netstream statistic function is disabled during this process.