HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

224
Examples
# Display the diagnostic log file configuration.
<Sysname> display diagnostic-logfile summary
Diagnostic log file: Enabled.
Diagnostic log file size quota: 10 MB
Diagnostic log file directory: cfa0:/diagfile
Writing frequency: 24 hour 0 min 0 sec
Table 49 Command output
Field Descri
p
tion
Diagnostic log file
• Enabled—Saving diagnostic logs from the buffer to the
diagnostic log file is enabled.
• Disabled—Saving diagnostic logs from the buffer to the
diagnostic log file is disabled.
Diagnostic log file size quota Maximum size of the diagnostic log file, in MB.
Log file directory Directory where the diagnostic log file is saved.
Writing frequency
Interval at which the system saves diagnostic logs from the buffer
to the diagnostic log file.
display info-center
Use display info-center to display information center configuration information.
Syntax
display info-center
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information center configuration information.
<Sysname> display info-center
Information Center: Enabled
Console: Enabled
Monitor: Enabled
Log host: Enabled
IP address: 192.168.0.1, port number: 5000, host facility: local7
IP address: 192.168.0.2, port number: 5001, host facility: local5
Log buffer: Enabled
Max buffer size 1024, current buffer size 512,
Current messages 0, dropped messages 0, overwritten messages 0
Log file: Enabled
Security log file: Enabled