HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

226
Severity
value
Level Description
Corresponding
keyword in
commands
7 Debug Debugging message. debugging
size buffersize: Specifies the number of latest log messages to be displayed, in the range of 1 to 1024.
Without this keyword, the command displays all log information.
slot slot-number: Specifies a card by its slot number. (MSR4000.)
Examples
# (MSR2000/MSR3000.) Display the state and log information of the log buffer.
<Sysname> display logbuffer
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 718
Current messages: 512
%Jun 17 15:57:09:578 2006 Sysname SYSLOG/7/SYS_RESTART:System restarted --
…
# (MSR4000.) Display the state and log information of the log buffer.
<Sysname> display logbuffer slot 1
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 0
Current messages: 127
%Jun 19 18:03:24:55 2006 Sysname SYSLOG /7/SYS_RESTART:System restarted
…
Table 51 Command output
Field Descri
p
tion
Log buffer
• Enabled—Logs can be output to the log buffer.
• Disabled—Logs cannot be output to the buffer.
Max buffer size
Maximum number of logs that can be stored in the log
buffer.
Actual buffer size
Actual number of logs that can be stored in the log
buffer. (This value is specified with the info-center
logbuffer size command.)
Dropped messages Number of dropped messages.
Overwritten messages Number of overwritten messages.
Current messages Number of current messages.
Related commands
• info-center logbuffer